「看見美麗台灣看見HTC」珍藏版隨身碟 開箱

因為所以我又買了台蝴蝶S，剛好就參加了HTC的這個活動

4G隨身碟一個，內含兩段台灣空拍影片

下面這張照片來自官網

威寶 Verbatim OTG Tiny 32GB USB 3.0 隨身碟 開箱

先寫結論：

1.緊、不管是蓋子還是Micro USB 插上手機都很緊，感覺蓋子的卡筍應該會被我拔蓋子時弄斷。

2.測速測爽的，所以看看就好。以前買過一支USB3.0的隨身碟，用一用還會過熱然後不給用，但是3.0的速度只有爽而已。

3.本來想買另外一款比較大支，是靠推桿推出兩邊接頭的，不過想了想還是當白老鼠買了這款比較新的產品。基本上不推薦買有蓋子的，因為最後幾乎蓋子都會不見..........

4.網路上找不太到這類OTG隨身碟的心得，應該是這一陣子才比較有大量產品的原因。另外一支的開箱可以看這邊 [開箱文] 威寶 Verbatim OTG 32GB 隨身碟。

5.文章還沒寫完PCHome又發信給我說產品再便宜50元，馬上參考阿達的文章 PCHOME購物買貴退差價不退貨的小撇步 來去退錢。

Logitech 遊戲鍵盤(G15)之遊戲軟體的自訂LCD顯示器中的小軟體列表修改

如圖中紅框處

用文字編輯器開啟

X:\Users\使用者名稱\AppData\Local\Logitech\Logitech Gaming Software\settings.json

Juniper EX2200 使用USB更新韌體

本來是用 TFTP 更新，不過因為 jinstall 檔案太大、動不動就斷線，有人提示可以使用 USB 更新。

不過測試時，USB 更新還是有點小不穩，最好的方法還是把檔案先複製到 /var/tmp 下面再更新。

1.Install Junos on the EX switch via the CLI (Command Line Interface) prompt:
Mount the USB device to the switch:
root@switch01:RE:0% mount_msdosfs /dev/da1s1 /mnt/
root@switch01:RE:0% cli
root@switch01> request system software add validate /mnt/ex2200/jinstall-ex-2200-12.3R3.4-domestic-signed.tgz

2.Reboot the EX switch:
root@switch01> request system reboot

3.After the reboot has completed, log in and verify that the new version of the software is properly installed:
user@switch> show version

原始網頁：http://kb.juniper.net/InfoCenter/index?page=content&id=KB20552#USB



PS.12.3R3.4版本更新最好跑 jloader 去更新、才不會有下面的 alarm 訊息發生

Upgrade bank is empty or corrupted for FPC 0, please do standard upgrade sequence


文章來源

http://forums.juniper.net/t5/Junos-and-Junosphere/Upgrade-bank-is-empty-or-cor

rupted-for-FPC-0-please-do-standard/m-p/153702//true?searchid=1277948172702#

http://goo.gl/isjBkB


root@switch01> request system software add validate /var/tmp/jloader-ex-2200-11.3I20110326_0802_hmerge-signed.tgz

root@switch01> request system reboot







問題

root> ...r-ex-2200-11.3I20110326_0802_hmerge-signed.tgz

tar: +CONTENTS: time stamp Mar 26 12:11 2011 is 9669669 s in the future

tar: +COMMENT: time stamp Mar 26 12:11 2011 is 9669669 s in the future

tar: +DESC: time stamp Mar 26 12:11 2011 is 9669669 s in the future

tar: +INSTALL: time stamp Mar 26 12:11 2011 is 9669668 s in the future

tar: jloader-ex-2200-11.3I20110326_0802_hmerge.tgz: time stamp Mar 26 11:56 2011 is 9668795 s in the future

tar: jloader-ex-2200-11.3I20110326_0802_hmerge.tgz.md5: time stamp Mar 26 12:11 2011 is 9669667 s in the future

tar: jloader-ex-2200-11.3I20110326_0802_hmerge.tgz.sha1: time stamp Mar 26 12:11 2011 is 9669667 s in the future

tar: jloader-ex-2200-11.3I20110326_0802_hmerge.tgz.sig: time stamp Mar 26 12:11 2011 is 9669667 s in the future

tar: certs.pem: time stamp Mar 26 08:02 2011 is 9654776 s in the future

verify-sig: cannot validate ./certs.pem

certificate is not yet valid: /C=US/ST=CA/L=Sunnyvale/O=Juniper Networks/OU=Juniper CA/CN=PackageDevelopment_11_3_0/emailAddress=ca@juniper.net



解法
http://kb.juniper.net/InfoCenter/index?page=content&id=KB21424
SOLUTION:

The problem is that the date of the switch is set to a date earlier than the date on which the jloader was built, therefore the certificate for the file is not yet valid. The solution is to either synchronize the date on the switch to a NTP server or to manually set the date. To manually set the date to July 7th 2011 5:00PM, use the following command:


root@switch> set date 201107071700.00
Thu Jul 7 17:00:00 UTC 2011
root@switch>
Running the command request system software add <package-name> will not display any more errors at this point.

關於 Intel i5 3470 + Asus P8Z77-V LX 在 WIN7 下會"凍結"的處理方法

其實這事發生很久了，大概有快一年那麼久XD

年初時因為手癢拿吸塵器去吸主機灰塵，結果吸一吸就不小心升級成

INTEL i5 3470 + ASUS P8Z77-V LX + 32G RAM


然後接下來就是一連串的惡夢，因為主機有在掛PT，所以是長年不關

但是換了系統以後常常發生系統凍結的狀況，一發生就只能重開機

後來有位網友也發生一樣的狀況，提示我把BIOS裡面的 C1 C3 C6 給關掉看看

事情就這樣解決了

這時候會補這篇也是已經有好個人寫信問我當初怎麼解決的，想說順便記錄一下好了，供後續有問題的人好 google



下面是當初我和網友的討論串，給大家參考一下